Bosch CCD - Volume Adjustment Procedures; Adjusting Current Source Volume; Setting Default Volume Levels

en | 49
03.2011Robert Bosch Car Multimedia GmbH
en
Adjusting the volume and sound
Adjusting the volume and sound
Adjusting the volume of the currently playing source
Function Action Note
Adjust the volume for
the cockpit
f Turn the control knob < At a volume level of “0”,
“MUTE” will be displayed.
Adjust the volume for
the cabin
f Turn the control knob ? At a volume level of “0”,
“MUTE” will be displayed.
Adjusting the default volume levels for various sources in the main menu
1
st
Menu level 2
nd
Menu level 3
rd
Menu level Function
:
*SETVOL *COCKPIT MIN V Min. and max. system volume
after power on
MAX V
TA V Volume for traffic announce-
ments
NAVI V Volume for navigation
announcements
PHONE V Volume for telephone audio
ALARM V Alarm volume (driver warning
system)
*CABIN MIN V Min. and max. system volume
after power on
MAX V
MIC1 V Volume for microphone
announcements
MIC2 V
MIC2 MIX
MIC3 V
MIC3 MIX
Once you have selected a menu item on the 3
rd
menu level:
f Press the control knob < to confirm the
menu item.
The current volume level is displayed.
f Set the desired volume using the control
knob <.
f Press the ESC button E to return to the
previous menu level.
02_ProLine3_en.indd 49 16.03.11 17:23