Bosch CCD - Page 55

en | 55
03.2011Robert Bosch Car Multimedia GmbH
en
Radio mode
Functions on the CCD
Note:
You can use the following functions
without radio mode being selected
for the cockpit or cabin. Please note
that passenger may be listening to
the current radio programme on a
connected multichannel audio system
(MAS).
Function Action Note
Start a search downwards
f Briefly press the <<
button :
Only applicable to a
device without Bluetooth®
functionality.
Start a search upwards
f Briefly press the >>
button 6
Access a stored station
f Briefly press the 1 - 6
button 8
Only in the current
memory bank.
Store the current station
f Long press the 1 - 6
button 8
Select the FM or WB frequency
range or switch between the
FMTS, FM1, FM2 and WB
memory banks
f Briefly press the FM
button ;
WB frequency range only
for the NAFTA region.
Select the MW, LW, or SW
frequency range
f Press the AM button 5 (if
necessary, several times)
Only for the Europe
region.
Select the AM frequency range
f Press the AM button 5 (if
necessary, several times)
Not for the Europe region.
Switch traffic announcement
priority on/off
f Briefly press the TA
button 7
–
Cancel a playing traffic
announcement
f Briefly press the TA
button 7
–
Travelstore (store stations
automatically)
f Long press the TA but-
ton 7
The discovered stations
are stored in the FMTS
memory bank.
02_ProLine3_en.indd 55 16.03.11 17:23