EasyManua.ls Logo

Bosch Climate 5000 RAC 7-2 OUE User Manual

Bosch Climate 5000 RAC 7-2 OUE
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
6720886909 (2018/04) GB
SPLIT-TYPE ROOM AIR CONDITIONER
Climate 5000
RAC 2,6-2 IBW / OU- OUE
RAC 3,5-2 IBW / OU- OUE
RAC 5,3-2 IBW / OU- OUE
RAC 7-2 IBW / OU- OUE
Installation Manual
IMPORTANT NOTE:
Read this manual carefully before installing or operating your new air conditioning unit. Make sure to save this manual for future reference.
Question and Answer IconNeed help?

Do you have a question about the Bosch Climate 5000 RAC 7-2 OUE and is the answer not in the manual?

Bosch Climate 5000 RAC 7-2 OUE Specifications

General IconGeneral
Cooling Capacity7.0 kW
Heating Capacity7.5 kW
RefrigerantR32
Energy Efficiency Ratio (Cooling)3.21
Coefficient of Performance (Heating)3.61
Power Consumption (Cooling)2180 W
TypeSplit Air Conditioner
Power Supply220-240V / 50Hz / 1Ph
Outdoor Unit Dimensions (W x H x D)800 x 550 x 300 mm

Summary

Safety Precautions

Read Safety Precautions Before Installation

Instructions to prevent serious damage or injury by following safety precautions.

Indoor Unit Installation Summary

Indoor Unit Installation Procedure

Step 1: Select Installation Location

Guidelines for choosing a suitable location for the indoor unit, noting restrictions.

Step 2: Attach Mounting Plate

Instructions for securely attaching the mounting plate to the wall.

Step 3: Drill Wall Hole for Piping

Instructions on drilling the wall hole for connective piping, considering diameter and angle.

Step 4: Prepare Refrigerant Piping

Guidance on preparing refrigerant piping, including cutting and bending without damage.

Electrical Wiring Guidelines and Precautions

Essential guidelines for safe electrical wiring and connections for the unit.

Outdoor Unit Installation Procedure

Refrigerant Piping Connection

Pipe Length Specifications and Cutting

Important notes on pipe length affecting efficiency and instructions for cutting pipes.

Step 3: Flare Pipe Ends

Detailed steps for flaring pipe ends to achieve an airtight connection.

Step 4: Connect Piping to Outdoor Unit

Instructions for connecting the refrigerant piping to the outdoor unit's valves.

Air Evacuation Procedure

Step 1: Evacuation Instructions

Detailed steps for performing the air evacuation process using manifold gauges and a vacuum pump.

Electrical and Gas Leak Checks

Electrical Safety Checks

Procedures for verifying electrical safety, grounding, and leakage.

Information Servicing and Safety

Related product manuals