EasyManua.ls Logo

Bosch Climate 5000 RAC 2,6-2 OUE User Manual

Bosch Climate 5000 RAC 2,6-2 OUE
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
6720886909 (2018/04) GB
SPLIT-TYPE ROOM AIR CONDITIONER
Climate 5000
RAC 2,6-2 IBW / OU- OUE
RAC 3,5-2 IBW / OU- OUE
RAC 5,3-2 IBW / OU- OUE
RAC 7-2 IBW / OU- OUE
Installation Manual
IMPORTANT NOTE:
Read this manual carefully before installing or operating your new air conditioning unit. Make sure to save this manual for future reference.
Question and Answer IconNeed help?

Do you have a question about the Bosch Climate 5000 RAC 2,6-2 OUE and is the answer not in the manual?

Bosch Climate 5000 RAC 2,6-2 OUE Specifications

General IconGeneral
Cooling Capacity2.6 kW
Energy Efficiency Class (Cooling)A++
Energy Efficiency Class (Heating)A+
RefrigerantR32
SEER6.1
Power Supply220-240 V / 50 Hz

Summary

Safety Precautions

General Safety Warnings and Cautions

Critical warnings and important cautions regarding electrical safety, unit capacity, and installation practices.

Installation Summary - Indoor Unit

Connect Piping

Detailed instructions for connecting the refrigerant piping.

Connect Wiring

Procedure for connecting the electrical wiring for the indoor unit.

Mount Indoor Unit

Instructions for securely mounting the indoor unit onto the wall plate.

Indoor Unit Installation

Step 2: Attach Mounting Plate to Wall

Detailed procedure for attaching the mounting plate securely to the wall.

Electrical Safety Guidelines

Essential safety guidelines for performing electrical work on the unit.

Step 8: Mount Indoor Unit

Detailed steps for securely mounting the indoor unit onto the prepared wall plate.

Outdoor Unit Installation

Step 1: Select Installation Location

Criteria for selecting an appropriate location for the outdoor unit.

Step 3: Anchor Outdoor Unit

Instructions for anchoring the outdoor unit to the ground or a wall-mounted bracket.

Step 4: Connect Signal and Power Cables

Procedure for connecting signal and power cables to the outdoor unit.

Refrigerant Piping Connection

Step 3: Flare Pipe Ends

Instructions for properly flaring pipe ends to achieve an airtight seal.

Flare Nut Torque Requirements

Table specifying the correct torque values for tightening flare nuts.

Step 4: Connect Pipes to Outdoor Unit

Procedure for connecting refrigerant pipes to the outdoor unit's valves.

Air Evacuation

Evacuation Procedure

Step-by-step guide for performing air evacuation using manifold gauge and vacuum pump.

Electrical and Gas Leak Checks

Electrical Safety Checks

Procedure for performing electrical safety checks after installation.

Gas Leak Checks

Methods for checking refrigerant pipe connections for leaks.

Test Run Procedure

Instructions for performing a test run to verify unit operation and safety.

Information Servicing

Related product manuals