Bosch CRD 47 MP3 - Page 39

en | 39
7 620 210 011 | 10.2009Robert Bosch Car Multimedia GmbH
en
To play the tracks contained in all the directo-
ries on the MP3 data carrier in random order,
press the 4 MIX button 4 once or
several times until "MIX ALL" is displayed.
The display shows the MIX symbol.
To cancel MIX,
press the 4 MIX button 4 once or
several times until "MIX OFF" is displayed.
The MIX symbol disappears from the display.
Scanning tracks (SCAN)
You can scan (briefl y play) all the tracks on the
MP3 data carrier.
Press the 5 SCAN button 4.
The next track will then be scanned. "SCAN"
briefl y appears on the display followed by the
current directory and the track number. In each
case, the track name is displayed as scrolling
text.
To end the scanning process,
press the 5 SCAN button 4.
The currently scanned track will then continue
to be played normally.
Repeating individual tracks or
whole directories (RPT)
To play the current track repeatedly,
press the 3 RPT button 4 once or
several times until "RPT TRCK" is dis-
played.
The display shows the RPT symbol.
To repeat the whole directory,
press the 3 RPT button 4 once or
several times until "RPT DIR" is displayed.
The display shows the RPT symbol.
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
To stop the current track or current directory
from being repeated,
press the 3 RPT button 4 once or
several times until "RPT OFF" is displayed.
The RPT symbol disappears from the display.
Interrupting playback (PAUSE)
Press the 2
button 4.
"PAUSE" appears on the display.
To cancel the pause,
press the 2
button 4 again.
Playback is continued.
Ñ
Ñ
Ñ
MP3/WMA Mode
02_crd47mp3_neu_en.indd 3902_crd47mp3_neu_en.indd 39 12.10.2009 11:49:31 Uhr12.10.2009 11:49:31 Uhr