Bosch CSG656BS2B/B1 Information For Use

Troubleshooting en
51
Fault Cause Troubleshooting
E:9001 lights up. Mains voltage is too low. This is not a fault on the appliance.
1. Contact an electrician.
2. Have the mains voltage and elec-
trical installation checked by an
electrician.
E:9240 lights up. Filters are soiled or blocked. ▶ Clean the filters.
→"Cleaning filters", Page45
A different error code ap-
pears in the display window.
E:0100 to E:9010
A technical fault is present. 1. Press .
2. Unplug the appliance or switch off
the fuse.
3. Wait at least 2minutes.
4. Insert the mains plug of the appli-
ance in a socket or switch on the
fuse.
5. Switch the appliance on.
6. If the problem occurs again:
‒ Press ⁠.
‒ Turn off the water tap.
‒ Pull out the mains plug.
‒ Contact "Customer Service"
→Page63 and give the er-
ror code.
Washing results
Fault Cause Troubleshooting
Tableware is not dry. No rinse aid used or dosage
set too low.
1. Add "Rinse aid" →Page31.
2. Set the amount of rinse aid to be
dispensed.
→"Setting the amount of rinse aid",
Page32
Programme or programme
option has no drying phase,
or the drying phase is too
brief.
▶ "Select a programme with drying,
e.g. intensive, strong or ECO pro-
gramme." →Page20
Some option buttons decrease the
drying result, e.g varioSpeed.

Bosch CSG656BS2B/B1 Specifications

General

Brand	Bosch
Model	CSG656BS2B/B1
Category	Oven
Language	English