EasyManua.ls Logo

Bosch CTL63E - Page 54

Bosch CTL63E
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
en
Simple troubleshooting
Problem Cause Solution
Hot water milky or tastes
of co󰀨ee.
Milk tube has not been
removed.
Remove the milk tube from the
milk container.
Milk or co󰀨ee residue in the
beverage outlet.
Clean the beverage outlet.
Co󰀨ee has no “crema”. Unsuitable type of co󰀨ee.
Use a type of co󰀨ee with a higher
proportion of robusta beans.
The beans are no longer fresh. Use fresh beans.
The grinding level is not
suitable for the beans.
Adjust the grinding unit to a
ner setting.
Co󰀨ee is too “acidic”. The grinding level is too
coarse. Preground co󰀨ee is
too coarse.
Adjust the grinding unit to a
ner setting. Use a ner ground
co󰀨ee.
Unsuitable type of co󰀨ee. Change the type of co󰀨ee.
Co󰀨ee is too “bitter”. Co󰀨ee is ground too nely.
Preground co󰀨ee is too ne.
Adjust the grinding level to a
coarser setting. Use a coarser
ground co󰀨ee.
Unsuitable type of co󰀨ee. Change the type of co󰀨ee.
Co󰀨ee tastes burnt. The brewing temperature is
too high.
Reduce the temperature, see
the section “Drink adjustment”.
Co󰀨ee is ground too nely.
Preground co󰀨ee is too ne.
Adjust the grinding level to a
coarser setting. Use a coarser
ground co󰀨ee.
Unsuitable type of co󰀨ee. Change the type of co󰀨ee.
Co󰀨ee is too “weak”. Co󰀨ee strength selected is too
weak.
Raise the strength of the
co󰀨ee, see the section “Drink
adjustment”.
Ground co󰀨ee jammed in the
co󰀨ee drawer.
Remove the ground co󰀨ee
drawer, clean and dry thoroughly.
Ground co󰀨ee sticks in
the co󰀨ee drawer.
Ground co󰀨ee sticks together. Do not press the ground co󰀨ee
rmly into the co󰀨ee drawer.
Co󰀨ee drawer is damp. Remove the ground co󰀨ee
drawer, clean and dry thoroughly.
The water lter does not
stay in position in the
water tank.
The water lter is not mounted
correctly.
Firmly press the water lter
straight down into the tank
connection.
Bean container sticks
when inserting.
There are beans in the
housing.
Remove the beans.
The co󰀨ee grounds are
not compact and are too
wet.
The grinding setting is too ne
or too coarse, or not enough
ground co󰀨ee has been used.
Adjust the grinding unit to a
coarser or ner setting, or use
2 level measuring spoons of
ground co󰀨ee.
Grinding level adjustment
is sti󰀨.
Too many beans in the
grinding unit.
Dispensing a drink from
co󰀨ee beans. Only make any
sub sequent changes to the
grinding level in small steps.

Table of Contents

Related product manuals