Need help?Do you have a question about the Bosch D9412G and is the answer not in the manual?
General| Type | Control Panel |
|---|---|
| Model | D9412G |
| Manufacturer | Bosch |
| Event Log | Up to 1000 events |
| Battery Backup | Yes |
| Compatibility | Bosch Security Systems |
| Partitions | 8 |
| Users | 50 |
| Keypad | Supports multiple keypads |
| Communication | IP |
| Compatible Protocols | SIA, Contact ID |
Steps for powering up the panel and initial programming.
Guidelines for performing comprehensive functional tests on the system.
Details the AC power circuit, transformer installation, and power failure indication.
Covers battery installation, replacement, supervision, and charging circuits.
Details programmable relay outputs, their programming, and fire system power calculations.
Information on the D928 module for dual phone line operation and its status LEDs.
Describes the ZONEX bus, POPIT modules, and their installation.
Instructions for installing and wiring the D8125 POPEX module.
Information on the OctoPOPIT module, its features, installation, and switch settings.
Procedures for testing off-board points using Service Walk Test.
Details on the OctoRelay module, configuration, installation, and wiring.
Information on the D811 module for adding a single relay output.
Covers connecting command centers, assigning addresses, and installation details.
To Next Page
