Bosch DDW88MM65 - User Manual

Other manuals for Bosch DDW88MM65

User Manual And Installation Instructions20 pages

Questions and Answers

E
Elizabeth WaltonAug 12, 2025
What to do if my Bosch DDW88MM65 is not working?
- N
  Nicholas MedinaAug 12, 2025
  If your Bosch Ventilation Hood isn't working, there are several potential causes. Ensure the mains plug is properly connected to the power supply. Check the circuit breaker in your fuse box. Also, verify if there has been a power cut by checking other appliances. Make sure the glass panel is correctly inserted. If liquid has flowed into the appliance, immediately pull out the mains plug or switch off the appliance at the circuit breaker in the fuse box. Finally, empty the drip trays and remove the grease filters cartridges, dry all accessible places, leave the appliance flap open and restart the appliance only after 48 hours, and insert the drip tray and the grease filters cartridges.
C
Christina CastilloAug 17, 2025
Why are the bottom two LEDs flashing on my Bosch Ventilation Hood?
- M
  mullinsrobertAug 17, 2025
  If the bottom two LEDs are flashing on the left-hand control panel of your Bosch Ventilation Hood, it indicates that the odour filters are saturated and you should change the odour filter.
B
Breanna HallAug 23, 2025
What to do if the flap on my Bosch DDW88MM65 won't close?
- J
  jose27Aug 25, 2025
  If the appliance flap on your Bosch Ventilation Hood does not close completely, it might be due to an object jammed in the appliance. Disconnect the appliance from the electricity, carefully open the flap and remove the object. Then, close the flap carefully and connect the appliance to the power supply.
R
rosschristopherAug 30, 2025
Why are the top two LEDs flashing on my Bosch DDW88MM65?
- P
  Paul CohenAug 30, 2025
  If the top two LEDs flash in the left-hand control panel on your Bosch Ventilation Hood, the grease filters are saturated.
H
Heidi Mendoza DVMSep 4, 2025
Why is the button illumination not working on my Bosch Ventilation Hood?
- S
  Sarah MartinezSep 5, 2025
  If the button illumination does not work on your Bosch Ventilation Hood, it indicates that the control unit is faulty.