Bosch Divar - Page 29

Divar | Operation Manual | Viewing live and playback video via a web browser EN | 27
Bosch Security Systems
English
PTZ speed
Drag or click the slider to adjust the speed of the PTZ controls.
> There are eight discrete speed levels.
Zoom, Focus, and Iris
1. Select the cameo of the camera you want to control.
2. Click the left zoom button to zoom out; click the right zoom button to zoom in.
3. Click the left focus button for far focus; click the right focus button for near
focus.
4. Click the left iris button to close the iris; click the right iris button to open the
iris.
Moving a camera to a pre-position
To move the active camera to a pre-position:
1. Enter a pre-position number.
2. Click Shot.
Click buttons one to five for immediate positioning to one of the first five pre-
positions.
To store the current position of the camera in a pre-position:
1. Enter a pre-position number.
2. Click Set.
Aux functions
Aux commands are special commands for controlling AutoDome™ cameras.
To switch on the Aux command:
1. Enter an Aux number
2. Click Aux On.
3. To switch off the Aux command, click Off.
Zoom
Focus
Iris