Need help?Do you have a question about the Bosch DIVAR IP 7000 and is the answer not in the manual?
General| Microphone in | Yes |
|---|---|
| USB 2.0 ports quantity | 4 |
| Ethernet LAN (RJ-45) ports | 3 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 2 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-C ports quantity | 0 |
| Wi-Fi | No |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| RAID levels | 5, 6 |
| Storage drive size | 3.5 \ |
| Storage drive capacity | 120 GB |
| Storage drive interface | - |
| Installed storage drive type | SSD |
| Supported storage drive types | HDD & SSD |
| Total installed storage capacity | 0.24 TB |
| Number of storage drives supported | 10 |
| Bus type | QPI |
| Stepping | C0 |
| Scalability | 1S |
| Processor code | SR14S |
| Processor cache | 8 MB |
| Processor model | E3-1275V3 |
| System bus rate | - GT/s |
| Processor series | Intel Xeon E3-1200 v3 |
| Processor socket | LGA 1150 (Socket H3) |
| Processor threads | 8 |
| Processor codename | Haswell |
| Processor frequency | 3.5 GHz |
| Processor cache type | Smart Cache |
| Processor lithography | 22 nm |
| Processor manufacturer | Intel |
| Processor package size | 37.5 x 37.5 mm |
| Processor front side bus | - MHz |
| PCI Express slots version | 3.0 |
| Processor boost frequency | 3.9 GHz |
| Processor operating modes | 64-bit |
| PCI Express configurations | 1x16, 2x8, 1x8+2x4 |
| Thermal Design Power (TDP) | 84 W |
| On-board graphics card model | Intel® HD Graphics P4600 |
| Memory bandwidth supported by processor (max) | 25.6 GB/s |
| Maximum internal memory supported by processor | 32 GB |
| Internal memory | 8 GB |
| Memory clock speed | 1666 MHz |
| Internal memory type | DDR3 |
| Thermal solution specification | PCG 2013D |
| Maximum number of PCI Express lanes | 16 |
| Memory types supported by processor | DDR3-SDRAM |
| Memory channels supported by processor | Dual |
| Intel Identity Protection Technology version | 1.00 |
| Chassis type | Rack (2U) |
| Cooling type | Active |
| Product color | Black |
| Number of fans | 2 fan(s) |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power supply unit (PSU) capacity | 740 W |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 10 - 35 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 8 - 90 % |
| Type | Storage server |
| Optical drive type | DVD-RW |
| Operating system installed | Windows Storage Server 2012 R2 |
| On-board graphics card base frequency | 350 MHz |
| On-board graphics card dynamic frequency (max) | 1250 MHz |
| Certification | CE, UL |
| Processor ARK ID | 75464 |
Weight and Dimensions| Depth | 648 mm |
|---|---|
| Width | 437 mm |
| Height | 89 mm |
| Weight | 23600 g |
Explains the meaning of warning, caution, and notice symbols used in the document.
Lists general safety rules to ensure safe operation and handling of the system.
Provides essential safety guidelines to read and follow before operating the device.
Outlines specific safety measures related to electrical hazards and system handling.
Details measures to prevent damage from Electrostatic Discharge (ESD) to electronic components.
Details specific safety warnings and precautions for mounting the unit in a rack.
Provides instructions for attaching the inner rails to the system chassis.
Details the process of mounting the outer rails onto the server rack.
Guides the user through the physical process of mounting the chassis into the rack.
Outlines the procedure for powering on the system after installation.
Guides the user through the initial application launch and setup process.
Explains the use of the Config Wizard for quick and easy system configuration.
Recommends strong password rules for securing the system against unauthorized access.
Explains the process of configuring port forwarding for internet access.
Details the procedure to safely de-energize the unit before maintenance.
Guides on how to safely remove a hard drive from its carrier.
Describes how to use system tools to identify faulty SSD drives.
Details how to replace a system fan, including safety warnings.
Outlines the procedure to restore the unit to its factory default image.
To Next Page