Installation instructions en
17
3.
Screw the enclosed sleeves fully into the upper ap-
pliance bracket.
Installing the appliance
1.
Place the mains plug on top of the appliance.
2.
Remove the grease filters.
3.
Hook the appliance into the appliance bracket from
above so that it clicks firmly into place.
4.
To align the appliance, if necessary, adjust the
height of the appliance from above using a screw-
driver.
5.
Secure the appliance from above using 2 nuts.
6.
Note:Do not knock the gas pressure dampers
against the painted inner frame.
Clip the gas pressure dampers in on the left- and
right-hand side of the appliance.
To Next Page
Loading...
