What to do if my Bosch EasyComfort TDS6040 does not produce steam?
If your Bosch Iron isn't producing steam during its first use, it might be because the hose hasn't completely filled with water. To fix this, press and hold the steam release button until steam comes out. Also, perform a cleaning cycle, never add products to the water, clean the soleplate with a damp cloth and restart and complete the iron descaling process.
Why does my Bosch EasyComfort TDS6040 make a pumping sound?
If your Bosch Iron is making a pumping sound, it's likely because water is being pumped into the iron, which is normal. If the sound persists, ensure the water tank is filled.
What to do if water flows through the holes on the soleplate of my Bosch EasyComfort TDS6040 Iron?
If water is flowing through the holes on the soleplate of your Bosch Iron, try the following: * Point the iron away from the ironing area and press the steam release button until steam is produced. * Carry out a cleaning cycle. * Never add products to the water. * Clean the soleplate with a damp cloth. * Restart and complete the iron descaling process.
Why is my Bosch EasyComfort TDS6040 not producing steam?
If your Bosch Iron is not producing steam during first use, the water may not have completely filled the hose. Press and hold the steam release button until steam comes out. Also, perform a cleaning cycle, never add products to the water, clean the soleplate with a damp cloth and restart and complete the iron descaling process.
What to do if dirt comes out of my Bosch EasyComfort TDS6040 Iron soleplate?
If dirt is coming out through the soleplate of your Bosch Iron, perform a cleaning cycle.
Why doesn’t the Calc'nClean light turn off on my Bosch Iron?
If the “Calc'nClean” indicator light on your Bosch Iron does not turn off and continues to flash, it means the descaling process has not been completed or was stopped prematurely. Ensure you complete the entire iron descaling process.
Why does my Bosch EasyComfort TDS6040 Iron produce little steam at first?
If your Bosch Iron produces little steam, especially when recently switched on, it is normal. The iron produces steam gradually until it is stabilized.
What to do if my Bosch EasyComfort TDS6040 Iron makes a pumping sound?
If your Bosch Iron is making a pumping sound, this is normal because water is being pumped into the iron. If the sound persists, check if the water tank is empty and, if so, fill it.
Why does my Bosch Iron produce little steam?
If your Bosch Iron produces little steam and has been switched on recently, it is normal. The iron produces steam gradually until it is stabilized.
Why does my Bosch Iron smoke when first turned on?
If your Bosch Iron smokes when you first switch it on, it's likely due to certain components being lightly greased at the factory. This is completely normal and should stop after a short while.
General| Power | 2400 W |
|---|---|
| Steam output | 40 g/min |
| Type | Steam Iron |
| Vertical steam function | Yes |
| Calc-clean function | Yes |
| Auto shut-off | Yes |
| Self-cleaning | Yes |
| Anti-drip system | Yes |
| Anti-calc system | Yes |
| Soleplate | Ceramic |
To Next Page