To Next PageTo Next Page
Need help?Do you have a question about the Bosch EasyCut 12 and is the answer not in the manual?
General| Power source | Battery |
|---|---|
| Battery voltage | 12 V |
| Battery capacity | 2.5 Ah |
| Soft grip | Yes |
| Product color | Black, Green, Red |
| Built-in light | - |
| Base plate material | Steel |
| Suitable for materials | Plastic, Wood |
| Cutting depth in wood | 65 mm |
| Idle stroke rate (max) | 4100 spm |
| Vibration level (wood) | 2.5 m/s² |
| Vibration level uncertainty (wood) | 1.5 m/s² |
Weight and Dimensions| Weight | 900 g |
|---|
Read all safety warnings and instructions. Failure to follow may result in shock, fire, or injury.
Keep work area clean and lit. Avoid hazardous atmospheres. Keep bystanders away.
Ensure proper plugs and outlets. Avoid body contact with earthed surfaces. Keep away from rain/wet.
Stay alert, use common sense. Wear protective equipment. Prevent unintentional starting. Dress properly.
Do not force tool, use correct tool. Ensure switch works. Disconnect before adjustments. Maintain tools.
Use specified chargers/batteries. Keep battery away from metal. Avoid battery liquid contact.
Have tool serviced by qualified personnel using identical replacement parts.
Hold insulated surfaces. Keep hands from sawing range. Apply tool when on. Base plate against workpiece.
For household use; cutting branches, slats, hard/soft wood. Suitable for straight cuts.
Lists numbered parts of the machine for illustration.
Details sound emission and vibration values per standards. Wear hearing protection.
Use specified chargers. Charge battery fully before first use.
Use clean blades. Ensure SDS receptacle is chip-free. Use blades suited for material.
Open cover, insert blade, close cover, lock lever. Chain tensioned automatically.
Open locking lever, fold cover upward, remove saw blade.
Dust can be harmful. Prevent dust accumulation. Ensure good ventilation.
Insert battery until it engages.
Insert charged battery into handle until it engages and is flush.
Press lock-off button, then On/Off switch. Release lock-off if needed. Release On/Off to switch off.
Speed is variable based on switch pressure. Reduce speed when starting cut.
LED indicates charge status (green/red, continuous/flashing).
Use firm support for small workpieces. Saw correctly. Don't carry by wrist. Saw with moderate pressure.
Tool shuts off if overloaded or too hot. Allow battery to cool.
Protect battery from moisture. Store within temp range. Replace used batteries.
Remove battery before cleaning. Keep machine and slots clean. Clean dry.
Contact service for repairs, spare parts. Website for info.
