Bosch EasySpray 18V-100 - Technical Data; Noise;Vibration Information; Rechargeable Battery

20 | English
(6)
Trigger switch
(7)
Container for spray material
(8)
Spare container for spray material
a)
(9)
Nozzle cap
(10)
O-ring
(11)
Gasket
(12)
Suction tube
(13)
Nozzle needle
(14)
Container seal
(15)
Ventilation hole
(16)
Paint channel
(17)Air hose
(18)
Bayonet lock
(19)Base unit
(20)
On/off switch
(21)
Carrying handle
(22)
Battery charge indicator
(23)
Air filter cover
(24)
Rechargeable battery
(25)
Hose port (base unit)
(26)
Carrying strap
(27)
Eyelet for carrying strap
(28)
Air filter
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Fine-spray systemEasySpray 18V-100
Article number
3 603 B08 0..
Rated voltageV=18
Spraying capacityml/min100
Required time for application of
paint on 2m
2
min2
Container capacity for spray
material
ml800
Nozzle cap(9) (grey)
–"Wood" application:
Spraying solvent-based and
water-dilutable lacquers,
varnishes, primers, clear lac-
quers and oils
●
Length of air hosem1.25
Weight according to
EPTA-Procedure 01:2014
kg2.1
(1.5Ah)to2.5
(6.0Ah)
Permitted ambient temperature
–During charging°C0to+35
Fine-spray systemEasySpray 18V-100
–During operation
A)
and dur-
ing storage
°C–20to+50
Recommended rechargeable
batteries
PBA 18V...W-.
Recommended battery char-
gers
B)
AL 18...
A)Limited performance at temperatures <10°C
B)The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Technical data determined using the battery that comes with the
product.
Noise/Vibration Information
Noise emission values determined according to
EN62841-1.
Typically, the A-weighted sound pressure level of the power
tool is 79dB(A). Uncertainty K=3dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN62841-1:
a
h
<2.5m/s
2
, K=1.5m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Rechargeable battery
Charging the battery
u Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
the first time.
1 609 92A 848 | (11.07.2022)Bosch Power Tools