To Next PageTo Next Page
Need help?Do you have a question about the Bosch PFS 5000 E and is the answer not in the manual?
General| Weight | 4800 g |
|---|---|
| SDS system | Yes |
| Input power | 1200 W |
| Product color | Black, Green, Red |
| Container capacity | 1000 ml |
| Capacity | 1 L |
| Best uses | Wood |
| Hose length | 4 m |
| Uncertainty K | 1.5 m/s² |
| Spray gun purpose | Paint |
| Vibration emission | 2.5 m/s² |
| Quantity per pack | 1 pc(s) |
| Power source | AC |
Read and save all safety warnings, instructions, illustrations, and specifications for future reference.
Ensure a clean, well-lit work area and keep children and bystanders away during operation.
Use correct plugs, avoid body contact with earthed surfaces, and keep tools dry.
Stay alert, wear protective equipment, and avoid awkward body positions.
Understand symbols on the fine-spray system for safe and effective operation.
Details the types of paints and materials suitable for spraying with the tool.
Lists and describes the numbered components and features of the fine-spray system.
Mandatory safety measure to protect hearing during operation.
Instructions for connecting the air hose to the base unit and spray gun.
Procedure for selecting and replacing nozzle caps based on paint type.
Steps to prepare the work environment and yourself before operating the tool.
Guidance on cleaning and preparing surfaces for optimal spraying results.
Information on compatible diluting agents and recommended dilution ratios for various materials.
Step-by-step guide on how to safely fill the spray material container.
Procedure for powering on the fine-spray system and preparing for use.
Techniques and tips for achieving optimal spray patterns and coverage.
Selecting the correct air flow setting for different types of spray materials.
Specific instruction for using the tool to spray warm water for wallpaper removal.
Essential procedures for cleaning the fine-spray system after use.
Detailed steps for cleaning components after use with water-based paints.
Detailed steps for cleaning components after use with solvent-based paints.
