Need help?Do you have a question about the Bosch ES 150 5 Series and is the answer not in the manual?
General| Fuel Type | Natural Gas |
|---|---|
| Max. Input (BTU/hr) | 150, 000 |
| Max. Output (BTU/hr) | 135, 000 |
| AFUE | 95% |
| Voltage | 120V |
| Efficiency | 95% |
| Max Water Temperature | 180°F |
Provides critical safety guidelines for installation, maintenance, and handover procedures.
Outlines safety requirements according to EN 60335-1 for domestic electrical appliances.
Mandates that installation and commissioning must be performed by an authorized contractor.
Key warnings and information to consider before commencing the installation process.
Guidelines for choosing a suitable location, including structural support and environmental factors.
Safety warnings and advice on using appropriate wall mounting brackets for secure installation.
Advises using dielectric unions and filters to prevent corrosion and material damage.
Emphasizes fitting a pressure relief valve to the cold water connection for safety.
Outlines the procedure for commissioning the DHW cylinder by an authorized contractor.
Stresses the contractor's responsibility to provide user information during handover.
Specifies that all maintenance and repair work must be performed by authorized contractors.
Details the importance of the magnesium anode and the need for its annual inspection.
Explains the safety thermostat's role and the procedure for authorized contractors to reset it.
A comprehensive table detailing common faults, their causes, and recommended remedies.
To Next Page