EasyManua.ls Logo

Bosch FMR-5000-C - Wiring and Technical Data; Wiring Connections; Technical Specifications

Bosch FMR-5000-C
64 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26 en | Wiring Remote Keypad
2017.07 | 4.0 | F.01U.258.926 Installation Guide Bosch Sicherheitssysteme GmbH
4 Wiring
1. Connect the shield wires to the screw terminal (11, page 000, step1).
2. Fasten the cables with cable ties (11, page 000, step1 to 4).
The Remote Keypad has
2 CAN interfaces (CAN1/CAN2) for networking
2 Ethernet interfaces (ETH1/ETH2) for networking
2 signal inputs (IN1/IN2)
1 USB and 1 RS232 interface
Consider the maximum cable length of 2m when using the USB and RS232 interfaces (see 10,
page 000).
Notice!
You will find detailed information about the CAN and Ethernet networking of the fire panels in
the Networking Guide available for download at www.boschsecurity.com.
!
Caution!
If Ethernet networking is planned, the Remote Keypad must be grounded.
Address Setting and Configuration
1. Assign a unique physical address to each Panel Controller and Remote Keypad by setting
the rotary switches and write it down on the label (see 13, page 000, step1 and 2).
2. For configuration, set the 6-pin DIP switch (see 13, page 000, step3).
3. Mark the setting on the provided label (step4).
5 Technical Data
LCD Ddisplay / touch screen LCD display with 320 x 240 pixels, touch screen with
127,5mmx170mm active surface
Operating and display elements 22 buttons, 1 key switch, 12 LEDs, 1 Reboot button
Interfaces CAN1, CAN2, ETH1, ETH2, USB, RS232
Signal inputs IN1/IN2
Permissable length of CAN cable for system
networking
Lmax = 1000 m, depending on configuration, cable type and
topology
Power supply connection DC1 (power supply), DC2 (redundant power supply)
Input voltage 12 V DC to 30 V DC, from FPA-5000/FPA-1200 or FPP‑5000
Maximum line restance of power supply 18 Ω
Maximum current consumption Standby operation: 140 mA at 24 V DC
During an alarm: 230 mA at 24 V DC
Permissible operating temperature -5 °C to +50 °C
Permissible storage temperature -20 °C to +70 °C
Housing material and color ABS plastic, light gray (similar RAL7035)
Dimansions (H x W x D) 280 mm x 340 mm x 87 mm

Related product manuals