Remote Keypad Safety Instructions | en 25
Bosch Sicherheitssysteme GmbH Installation Guide 2017.07 | 4.0 | F.01U.258.926
1 Safety Instructions
Warning!
Live components and stripped cable! Risk of injury from electric shock. The system must be
current-free during connection work.
Notice!
Installation must only be performed by authorized and specialized personnel!
Bosch Sicherheitssysteme GmbH, Robert-Bosch-Ring 5, 85630 Grasbrunn, Germany retains
the complete copyright to the whole documentation. Without the express written permission
of Bosch, no part of these documents may be duplicated or transmitted in any form.
Bosch reserves the right to make changes to this manual without prior notice.
2 Functional Description
The Remote Keypad can be used to perform the same operating procedures as the control
panel, enabling variable operation of a networked system. It has the following functional
elements (see 1, page 000):
Pos. Designation Function
A Touch screen Operating the networked system through virtual buttons and variable display windows
B 22 fixed buttons Standard entries
C 12 LEDs Indicating the operating status
D Key switch 2 switch settings, freely programmable, e.g. for switching between day/night mode or
connecting/disconnecting for local alarm signaling
E Reboot button Remote Keypad HW reset
F 6-pin DIP switch Configuration
G 3 rotary switches Address setting
3 Installation
Follow the mounting instructions according to the mouting variant for your application.
4 Before mounting the housing, remove the operating unit. This prevents the touch screen
being damaged and facilitates installing the lower mounting screws.
Mounting variants Illustration Mounting Instructions
Surface wall mounting See 2, page 000, I See 3, page 000 to 5, page 000 (step 1 to 13) and 6, page
000
Flush wall mounting See 2, page 000, II See 3, page 000 to 5, page 000 (step 1 to 13) and 7, page
000
Tilted installation See 2, page 000, III See 3, page 000 to 5, page 000 (step 1 to 13) and 8, page
000
To Next Page
Loading...
