6 720 645 349 (2010/09)
Operation | 25
Operation Display
Resetting all settings (for contractors only):
This function returns all adjustments of the MAIN MENUand the INSTALLER SETTINGSto their factory
settings. Following such a reset, your contractor will need to recommission the system.
If the standard display is set:
Hold down and simultaneously, until the following
warning is displayed together with a 10 second countdown:
If all previous adjustments are really to be reset:
Continue to hold down and simultaneously, until the
following prompt appears:
Press to finalise the reset.
All adjustments have now been returned to their factory settings, and the system must be re-
commissioned by a contractor.
menu
6 720 617 763-15.2O
9
12
h
15
18
21
24
h
3
6
menu
6 720 617 763-16.1O
9
12
h
15
18
21
24
h
3
6
To Next Page
Loading...
