Bosch G Series - Quick Command Operations

Control panels Quick commands | en
25
Bosch Security Systems B.V. 2019-12 | 03 | F.01U.352.527
5 Quick commands
How to operate quick commands with B94x / B93x / B92x /
B91x
1. Press CMD + one or two digits as shown in the table below.
2. Enter your passcode.
3. Press ENTER.
P The quick command is executed.
Action Quick command
All arm, delay CMD+1
All arm, instant CMD+1+1
Part arm, delay CMD+3
Part arm, instant CMD+2
Bypass CMD+0
Unbypass CMD+0+0
Silence troubles CMD+4
See alarms CMD+4+0
Add user CMD+5+6
Delete user CMD+5+3
Change passcode CMD+5+5
Watch mode CMD+6