36
en | Operations Control panels
2019-12 | 03 | F.01U.352.527 Bosch Security Systems B.V.
4. Press 2 to open the unbypass points menu.
5. Enter your passcode.
6. Press ENTER.
7. To select a point, use PREV and NEXT.
8. Press ENTER.
P The point is unbypassed.
6.5 Resetting sensors
After an alarm or trouble, sensors have to be reset so that they can go
back to the normal state.
Preparations
4 Make sure that no danger, such as smoke, fire or an intruder is
present in the premises.
How to reset sensors with B94x / B93x
1. Open the menu. Refer to B94x / B93x keypads menu and navigation,
page 19.
2. Press Actions.
3. Press Reset.
P The sensors are reset.
P The system is ready to be armed.
How to reset sensors with B92x / B91x
1. Open the menu. Refer to B92x / B91x keypads menu and navigation,
page 22.
2. Press 3 to open the actions menu.
3. Press 1 to select reset sensors.
P The sensors are reset.
P The system is ready to be armed.
To Next Page
Loading...
