Bosch G Series - Page 30

30
en | Operations Control panels
2019-12 | 03 | F.01U.352.527 Bosch Security Systems B.V.
6. Press ENTER.
7. Select the area or areas.
8. Press On Delay or On Instant.
P The area or areas are all armed.
How to all arm an area with B92x / B91x
1. Open the menu. Refer to B92x / B91x keypads menu and navigation,
page 22.
2. Press 1 to open the on/off menu.
3. Press 1 to open the all on menu.
4. Press 3 to select all on select.
5. Enter your passcode.
6. Press ENTER.
7. To select the area, use PREV and NEXT.
8. Press ENTER.
9. To select On Delay or On Instant, use PREV and NEXT.
10. Press ENTER.
P The area or areas are all armed.
6.3.4 Part arming, delay
Part arm the perimeter and unused parts of the premises with exit delay
time gives you time to leave the perimeter and unused parts of the
premises without sounding the alarm.
How to part arm with B94x / B93x, delay
1. Open the menu. Refer to B94x / B93x keypads menu and navigation,
page 19.
2. Press On/Off.
3. Press Part On.
4. Press Part On Delay.
5. Enter your passcode.