To Next PageTo Next PageWhat to do if my Bosch Battery Charger isn't charging my external USB device?
If your external USB device isn't charging, ensure the battery pack is charged. Connect the charging cable to the USB port on the battery controller and activate it by pressing the On button. Also, verify your device's power requirements: it should not exceed 5V DC, 2.4 Amp (one USB port) or 5V DC, 1.2 Amp (two USB ports). Compatibility issues may exist.
Why is my Bosch Battery Charger not heating my heated jacket?
If your heated jacket isn't heating up, first, check that the battery pack is charged. Next, ensure the heating element cable is properly connected to the port on the battery controller, and that the battery controller is activated by pressing the On button.
General| Input Voltage | 100-240 V AC |
|---|---|
| Battery Voltage | 18 V |
| Battery Chemistry | Li-ion |
| Charging Time (2.0 Ah battery) | 30 min |
| Charging Time (4.0 Ah battery) | 60 min |
| Compatibility | Bosch 18V batteries |
| Protection Features | Short-circuit protection |
| Storage Temperature | -20 to 60 °C |
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, will result in minor or moderate injury.
Advises users to stay alert, use common sense, and avoid use when tired or under the influence.
Guidelines on disconnecting the battery pack and proper storage for safe use.
Instructions on recharging, handling battery packs, and avoiding hazardous conditions.
Recommends servicing by qualified personnel using identical replacement parts.
Provides instructions for inserting and releasing the battery pack into the controller.
Details on using USB ports to power external devices and ensure compatibility.
Instructions for connecting the heating element power cable for the heated jacket.
