INSERTING AND RELEASING
BATTERY PACK
For use only with Bosch
recommended batteries.
Use of any other battery packs may create a
risk of jacket malfunctions, injury and fire.
To insert battery, align battery and slide battery
pack into battery controller until it locks into
position (an audible click sound is an indication
that the battery is locked) (Fig. 2). Do not force.
To remove the battery pack, press the battery
pack release button and slide the battery pack
completely off of the battery controller.
Assembly
Model number: GAA18V-24
Voltage rating: 18V
-6-
Functional Description and Specifications
The battery controller is intended for using a Bosch 18 V lithium-ion battery as the voltage
source. With the battery controller a maximum of two USB devices and one heating element for
the Bosch heating jacket can be powered simultaneously.
FIG. 1
Battery Packs/Chargers
Please refer to the Charger Manual included with your tool.
NOTE: For tool specifications refer to the nameplate on your tool.
FIG. 2
BATTERY
PACK
RELEASE
BUTTON
BELT CLIP
BOSCH 18V BATTERY
(not included)
BATTERY
CONTROLLER
USB PORT
ON BUTTON
HEATING ELEMENT
POWER PORT
USB PORT
CONTROLLER
!
WARNING
To Next Page
Loading...
