Bosch GBH 2-26 DFR - Technical Data

8 | English 1 619 929 728 • 20.2.07
Technical Data
Product Features
The numbering of the product features refers to the
illustration of the power tool on the graphics page.
1 Quick change keyless chuck (GBH 2-26 DFR)
2 SDS-plus quick change chuck (GBH 2-26 DFR)
3 SDS-plus tool holder
4 Dust protection cap
5 Locking sleeve
6 Lock ring for rapid-change chuck
(GBH 2-26 DFR)
7 Rotational direction switch
(GBH 2-26 RE/DRE/DFR)
8 Lock-on button for On/Off switch
9 On/Off switch
10 Release button for mode selector switch
11 Mode selector switch
12 Button for depth stop adjustment
13 Depth stop
14 Auxiliary handle
15 Securing screw for key type drill chuck*
16 Key-type drill chuck*
17 SDS-plus adapter shank for drill chuck*
18 Drill chuck mounting (GBH 2-26 DFR)
19 Front sleeve of the quick change keyless chuck
(GBH 2-26 DFR)
20 Retaining ring of the quick change keyless chuck
(GBH 2-26 DFR)
21 Extraction sleeve of the dust extraction attachment*
22 Clamping screw for the dust extraction attachment*
23 Depth stop of the dust extraction attachment*
24 Telescopic pipe of the dust extraction attachment*
25 Wing bolt of the dust extraction attachment*
26 Guide pipe of the dust extraction attachment*
27 Universal bit holder with SDS-plus shank*
*The accessories illustrated or described are not includ-
ed as standard delivery.
Rotary Hammer GBH ...
Professional
2-26 E 2-26 RE 2-26 DE 2-26 DRE 2-26 DFR
Article number 0 611 251 6.. 0 611 251 7.. 0 611 253 6.. 0 611 253 7.. 0 611 254 7..
Speed control zzzzz
Stop rotation – – z z z
Right/left rotation – z – zz
Quick change chuck – – – – z
Rated power input W 800 800 800 800 800
Impact frequency at rated
speed
bpm 0–4000 0–4000 0–4000 0–4000 0–4000
Impact energy per stroke J 0–3.0 0–3.0 0–3.0 0–3.0 0–3.0
Rated speed rpm 0–900 0–900 0–900 0–900 0–900
Tool holder SDS-plus SDS-plus SDS-plus SDS-plus SDS-plus
Spindle collar diameter mm 50 50 50 50 50
Drilling diameter, max.:
– Concrete
– Brickwork (with core bit)
–Steel
–Wood
mm
mm
mm
mm
26
68
13
30
26
68
13
30
26
68
13
30
26
68
13
30
26
68
13
30
Weight according to
EPTA-Procedure 01/2003
kg 2.7 2.7 2.7 2.7 2.9
Protection class / II / II / II / II / II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries, these
values can vary.
Please observe the article number on the type plate of your power tool. The trade names of individual tools may vary.
OBJ_BUCH-316-001.book Page 8 Tuesday, February 20, 2007 9:52 AM