To Next PageTo Next Page
Need help?Do you have a question about the Bosch GCL100-80C and is the answer not in the manual?
General| Laser Class | Class 2 |
|---|---|
| Self-Leveling Range | ±4° |
| Leveling Type | Self-Leveling |
| Operating Temperature | 14°F to 122°F (-10°C to 50°C) |
| Power Supply | 4 x AA Batteries |
| IP Rating | IP54 |
| Bluetooth Connectivity | Yes |
| Type | Cross-line laser level |
| Working Range | Up to 30 m (with detector) |
| Laser Diode | 635 nm |
| Weight | 1.4 lbs |
| Mounting Options | Tripod, magnetic |
Alerts user to potential personal injury hazards; obey messages to avoid injury or death.
Do not direct laser beam at people/animals or stare into it; risk of blindness.
Do not operate near children or allow them to operate; risk of serious eye injury.
Follow all instructions for battery handling to prevent explosion, leaks, injury, or fire.
Do not modify the laser equipment; risk of hazardous radiation exposure.
Always wear eye protection and other safety equipment for personal injury reduction.
Ensure switch is off before inserting batteries to prevent accidental energizing.
Keep tool and accessories away from cardiac pacemakers due to magnetic fields.
Do not use if switch is faulty; tool must be controllable for safety.
Recharge with specified chargers; follow all instructions to prevent fire/injury.
Use designated battery packs; keep away from metal objects; do not use damaged/modified batteries.
Tool is for determining/checking horizontal/vertical lines and plumb points, indoor/outdoor use.
Tool levels automatically within ±4° range; lines stop flashing when leveled.
Tool levels automatically; flashing lines indicate outside self-leveling range.
Procedure to check leveling accuracy of the horizontal laser line using two walls.
Check horizontal line leveling accuracy using a 16x16 ft area and two walls.
Procedure to check leveling accuracy of the vertical laser line using a door opening.
Procedure to check plumb accuracy using floor-to-ceiling measurements.
