Bosch GDS 18 E Professional - Power Tool Use and Care; Avoid Forcing the Power Tool; Handle Faulty Switches Safely; Disconnect Before Adjustments

14 | English
1 609 929 Y31 | (8.2.11) Bosch Power Tools
Product Description and
Specifications
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for driving in and loos-
ening screws and bolts as well as for tightening
and loosening nuts within the respective range
of dimension.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Tool bit*
2 Tool holder
3 Suspension hook
4 Handle (insulated gripping surface)
5 On/Off switch
6 Thumbwheel for speed preselection
7 Rotational direction switch
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 95 dB(A);
Sound power level 108 dB(A). Uncertainty
K=3dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Impact tightening of fasteners of the maximum
capacity of the tool: Vibration emission value
a
h
=4 m/s
2
, Uncertainty K=0.5 m/s
2
.
Impact Wrench GDS 18 E
Professional
Article number
3 601 D44 0..
Rated power input
W 500
Output power
W 270
No-load speed
min
-1
800–1900
Rotational speed under
load
min
-1
500–1300
Max. torque for
hard/soft screwdriving
application according to
ISO 5393 Nm
70–250/
50–160
Right/left rotation
z
Screw-Ø
M6–M18
Tool holder
 ½"
Weight according to
EPTA-Procedure
01/2003
kg 3.2
Protection class
/ II
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
OBJ_BUCH-544-002.book Page 14 Tuesday, February 8, 2011 1:09 PM