1 609 929 M72 | (9.11.07) Bosch Power Tools
6 | English
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the tool and leave it open.
Intended Use
The machine is intended for driving in and loos-
ening screws and bolts as well as for tightening
and loosening nuts within the respective range of
dimension.
Product Features
The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 Utility clip
2 Dial control for speed preselection
3 On/Off switch
4 Rotational direction switch
5 Tool holder
6 Tool bit
Illustrated or described accessories are not included
as standard delivery.
Technical Data
Assembly
Changing the Tool
f Before any work on the power tool itself,
pull the mains plug.
f When you install the tool bit, take care that
the tool bit is seated securely on the tool bit
holder. If the tool bit is not joined securely to
the tool bit holder, it may become loose and it
may no longer be controllable.
Slide the application tool 6 onto the square drive
of the tool holder 5.
Impact Wrench GDS 18 E
Professional
Article number
0 601 436 8..
Rated power input
W 500
Output power
W 270
No-load speed
rpm 800–1900
Rotational speed under
load
bpm 500–1300
Max. torque for hard/soft
screwdriving application
according to ISO 5393
Nm
70
–250/
50
–160
Right/left rotation
Screw-
Ø M 6–M 18
Tool holder
½"
Weight according to
EPTA-Procedure 01/2003
kg 3.2
Protection class
/ II
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your power tool. The trade names of individual tools may
vary.
OBJ_BUCH-546-001.book Page 6 Friday, November 9, 2007 8:43 AM
To Next Page
Loading...
