English | 15
Bosch Power Tools 1 609 92A 3FX | (22.9.16)
To switch on the Bluetooth® connection on the measuring
tool, open the “Main Menu” (see “Navigating the “Main
Menu””, page 15) and set “Bluetooth” to “On”. The indicator
f will appear on the display. Ensure that the Bluetooth® inter-
face is activated on your mobile terminal/device.
Special Bosch applications (apps) are available to extend the
functional range of the mobile terminal/device and for simpli-
fication of the data processing. Depending on terminal/de-
vice, these can be downloaded at the respective app stores:
The connection between mobile terminal/device and measur-
ing tool is established after the Bosch application has started
(if Bluetooth® modules are activated). If multiple active meas-
uring tools are found, select the appropriate measuring tool.
A connection will be established automatically if only one ac-
tive measuring tool is found.
Note: When establishing the connection between the mea-
suring tool and the mobile terminal/device (e.g., smart-
phone, tablet) the first time (pairing), the measuring tool’s
PIN code may be requested. In this case, enter “0000”.
When transmitting data by means of Bluetooth®, time lags
may occur between mobile terminal/device and measuring
tool as a result of poor reception conditions.
“Main Menu”
Navigating the “Main Menu”
“Tool” Submenu
Open the “Main Menu” and select the “Tool” submenu. It
contains the following menu items:
– Language:
In the “Language” menu you can change the language of
all indications.
– Time/Date:
To change the date and time in the indicator a, open the
“Time & Date” submenu. In this submenu you can also
change the date and time format.
To exit the “Time & Date” submenu, press either the left-
hand function button 17 under the tick symbol to save the
settings or the right-hand function button 10 under the
cross symbol to discard the changes.
– Unit:
In the “Unit” menu you can choose whether the tempera-
ture specifications are displayed in “°C” or “°F”.
– Audio Signal:
In the “Audio Signals” menu you can switch the audio
signal that sounds upon a surface temperature alarm on
and off.
– Measuring Frame:
In the “Measuring Frame” menu you can switch the meas-
uring frame b on the display on and off.
– Colour Scheme:
In the “Colour Scheme” menu you can choose the colour
of the temperature values and other indications on the dis-
play. The setting will also be applied to saved screenshots.
– Shutdown Time:
In the “Shutdown Time” menu you can choose the time in-
terval after which the measuring tool will automatically
shut down if no button is pressed. You can also deactivate
the automatic shutdown by selecting the “Never” setting.
The shorter the shutdown time, the more energy you can
save.
–To go to the “Main Menu”, press the right-
hand function button 10 under the menu sym-
bol m on the standard display screen.
– To navigate within a menu level, press the up-
ward arrow button 16 or the downward arrow
button 13 repeatedly until the desired menu
item is highlighted in colour.
– If there is a submenu for a highlighted menu
item, this will be indicated by an arrow point-
ing to the right next to “set ...”. Press the
right-hand arrow button 11 to enter the sub-
menu.
– If there are multiple options for a highlighted
menu item, the current setting is displayed
between two arrows. To change the setting,
press the left-hand arrow button 15 or the
right-hand arrow button 11. Numerical values
are changed faster if you keep the corre-
sponding arrow button pressed.
– In some menu items you can switch a function
on or off. To switch off, press the left-hand ar-
row button 15 so that “Off” is highlighted. To
switch on, press the right-hand arrow button
11 so that “On” is highlighted. You can also
switch the function on and off in the menu by
pressing the save/send button 9.
– To switch to a parent menu, press the left-
hand function button 17 under the back sym-
bol. The selected settings will be saved.
–To exit the “Main Menu” and return directly to
the standard display screen, press the right-
hand function button 10 under the house
symbol. The selected settings will be saved.
– You can also press the measure button 4 to ex-
it any menu and return to the standard display
screen. If the button is pressed once, the se-
lected settings will be saved but no measure-
ment will be initiated.
OBJ_BUCH-2452-005.book Page 15 Thursday, September 22, 2016 7:55 PM
To Next Page
Loading...
