12
EURO • Printed in Germany • BA 1 609 929 535 • GKS 55/65/66 CE • GB • OSW 11/99
1 609 929 535 • TMS • 29.10.99
1 Spindle lock
2 Switch lock
3 On/Off switch
4 Handle
5 Speed selector thumbwheel (GKS 66 CE)
6 Cutting depth scale
7 Winged screw for cutting depth setting
8 Cutting angle scale
9 Winged screw for cutting angle setting
10 Auxiliary handle
11 Winged screw for parallel guide
12 Parallel guide
13 Swinging protective guard
14 Base plate
15 Riving knife attachment
16 Saw dust ejector
17 Allen key
18 Clamping bolt with washer
19 Clamping flange
20 Mounting flange
21 Riving knife
22 Motor spindle
23 Cutting mark, 0°
24 Cutting mark, 45°
Not all of the accessories illustrated or described are
included as standard delivery.
Measured values determined according to
EN 50 144.
The A-weighted noise levels of the machine are
typically: Sound pressure level: 90 dB (A); sound
power level: 103 dB (A).
Wear hearing protection!
The typical hand-arm vibration is below 2.5 m/s
2
.
GKS 55 / GKS 65
The machine is intended for lengthways and
crossways cutting of wood with straight cutting
lines as well as mitre angles to 45° while resting
firmly on the work piece.
GKS 66 CE
The machine is intended for lengthways and
crossways cutting of wood with straight cutting
lines as well as mitre angles to 45° while resting
firmly on the work piece. With suitable saw
blades, non-ferrous metal, light building materials
and plastic can also be sawed.
Product Specification
Hand Circular Saw GKS 55 GKS 65 GKS 66 CE
Part number 0 601 567 1.. 0 601 568 1.. 0 601 568 7..
Rated power 1 200 W 1 200 W 1 600 W
Output power 760 W 760 W 940 W
No-load speed 4 100 RPM 4 100 RPM 1 800 - 4 100 RPM
Speed under load, max. 2 800 RPM 2 800 RPM 3 700 RPM
Riving knife thickness, max. 1.9 mm 1.9 mm 1.9 mm
Cutting depth at 90°, max. 55 mm 65 mm 66 mm
Cutting depth at 45°, max. 36 mm 43 mm 43 mm
Speed selection – – •
Constant electronics – – •
Overload protection – – •
Starting current limiter – – •
Base plate 358 x 151 mm 358 x 151 mm 358 x 151 mm
Weight (without optional extras) 4.7 kg 4.7 kg 4.8 kg
Safety class / II / II / II
Saw blade dia. (max.) 170 mm 190 mm 190 mm
Saw blade dia. (min.) 159 mm 177 mm 177 mm
Saw blade thickness (central part), max. 1.8 mm 1.8 mm 1.8 mm
Tooth thickness, max. 2.9 mm 2.9 mm 2.9 mm
Tooth thickness, min. 2.0 mm 2.0 mm 2.0 mm
Mounting hole 30 mm 30 mm 30 mm
GB
Machine Elements Noise/Vibration Information
Intended Use
GKS 55/65/66 CE - Buch Seite 12 Dienstag, 9. November 1999 3:57 15
To Next Page
Loading...
