13
Changing the filter
C
leaning the motor protection filter
The motor protection filter should be cleaned regularly by knocking out the
dirt and rinsing.
Figure
● Open the dust bag compartment lid
Figure .
●
Remove the motor protection filter from the appliance in the direction of
the arrow.
● Clean the motor protection filter by tapping it out.
●
If it is very dirty, the motor protection filter should be rinsed out. The filter
must then be left to dry for at least 24 hours.
● After cleaning, push the motor protection filter into the appliance.
● Close the dust bag compartment lid.
21
19
21
24h
To Next Page
Loading...
