7
Setting up
Figure
a)Push the flexible hose adapter into the air intake opening in the vacuum
c
leaner lid until it locks into place.
b)To remove the flexible hose, press the two catches together and pull out
the hose.
Figure
● Connect the handle and the telescopic tube together.
● To release the connection, pull out the telescopic tube.
Figure
● Connect the floor tool and the telescopic tube together.
● To release the connection, pull out the telescopic tube.
Figure
● Move the sliding sleeve in the direction of the arrow to release the
telescopic tube and adjust it to the length required.
3
4
5
6
3
Click!
a
b
4
5
6
To Next Page
Loading...
