English | 21
Bosch Power Tools 1 609 92A 3MW | (21.11.16)
The measuring tool monitors the proper function for
each measurement. When a defect is detected, all in-
dicators on the display flash. In this case, or when the
corrective measures listed above cannot correct the
error, have your dealer forward the measuring tool to
an authorised Bosch after-sales service.
Maintenance and Service
Maintenance and Cleaning
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other
fluids.
Wipe off debris using a moist and soft cloth. Do not
use any cleaning agents or solvents.
Maintain the reception lens 7 in particular, with the
same care as required for eye glasses or the lens of a
camera.
If the measuring tool should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an authorised after-sales ser-
vice centre for Bosch power tools. Do not open the
measuring tool yourself.
OBJ_BUCH-3062-001.book Page 21 Monday, November 21, 2016 4:09 PM
To Next Page
Loading...
