Need help?Do you have a question about the Bosch GMS120 and is the answer not in the manual?
General| Detection Depth for Steel | 120 mm |
|---|---|
| Detection Depth for Copper | 80 mm |
| Detection Depth for Live Wires | 50 mm |
| Detection Depth for Wood | 38 mm |
| Automatic Calibration | Yes |
| Display | Yes |
| Maximum Detection Depth (Ferrous Metals) | 120 mm |
| Maximum Detection Depth (Non-Ferrous Metals) | 80 mm |
| Maximum Detection Depth (Copper) | 80 mm |
| Maximum Detection Depth (Wood) | 38 mm |
| Detection Depth (Live Cables) | 50 mm |
| Dimensions | 200 x 85 x 32 mm |
| Material | Plastic |
| Weight | 270 g |
| Detectable Materials | Ferrous metals, non-ferrous metals, live cables, wood |
| Automatic Deactivation | Yes, after 5 minutes |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +70°C |
| Color | Black |
| Power Source | 1 x 9V battery |
Read and observe all instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Please unfold the fold-out page with the representation of the measuring tool and leave it unfolded while reading the operating instructions.
The measuring tool is intended for the detection of metals, joists and "live" wires/conductors in walls, ceilings and floors.
The numbering of the product features shown refers to the illustration of the measuring tool on the graphic page.
Details of various indicators and symbols displayed on the GMS120.
Specifications including article number, depth, voltage, weight, and protection degree.
Instructions for inserting or replacing the battery.
General guidance on protecting the tool and handling temperature variations.
Steps for switching the tool on/off, display illumination, and audio signal.
Explains how the tool detects objects and the measuring procedure.
Details on selecting operating modes for best measuring results.
Instructions for using the tool in Drywall mode to detect wood or metal.
Instructions for using the tool in Metal mode to detect magnetic and non-magnetic objects.
Instructions for using the tool to detect live conductors (110-230 V).
Factors that can impair measurements and advice on using other information sources.
How to mark detected objects using the tool's marking hole.
Explanation of the temperature control indicator and its implications.
What to do when the warning indicator lights up or flashes.
Steps for manually recalibrating the measuring tool.
Guidelines for cleaning, maintenance, and service of the measuring tool.
To Next Page
