Detectores de metales y otros materiales digitales GMS120 bosch manual ingles www.viaindustrial.com
Detectores de metales y otros materiales digitales GMS120 bosch manual ingles www.viaindustrial.com
10
|
English
English
Safety
Notes
Read
and
observe
all
instructions.
SAVE
THESE INSTRUCTIONS FOR FUTURE REFER-
ENCE.
Have
the
measuring
tool
repaired
only
through
quali-
fied
specialists
using
original
spare
parts.
This ensures
that the safety of the measuring tool is maintained.
Do
not
operate
the
measuring
tool
in
explosive
environ-
ments,
such
as
in
the
presence
of
flammable
liquids,
gases
or
dusts.
Sparks can be created in the measuring
tool which may ignite the dust or fumes.
For
technological
reasons,
the
measuring
tool
cannot
ensure100
%
certainty. To ruleouthazards,safeguard
yourself
each
time
before
drilling,
sawing
or
routing
in
walls,
ceilings
or
floors
by
means
of
other
information
sources,
such
as
building
plans,
pictures
from
the
con-
struction
phase,
etc.
Environmental influences, such as
humidity or closeness to electrical devices, can influence
the accuracy of the measuring tool. Surface quality and
condition of the walls (e.g., moisture, metallic building ma-
terials, conductive wallpaper, insulation materials, tiles)
aswellastheamount,type,sizeandpositionoftheobjects
can lead to faulty measuring results.
Product
Description
and
Specifications
Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.
Intended
Use
The measuring tool is intended for the detection of metals
(ferrous and non-ferrous metals, e.g., rebar), joists and “live”
wires/conductors in walls, ceilings and floors.
Product
Features
The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1
Illuminated ring
2
Marking hole
3
Display
4
Operating-mode indication
5
On/Off button
6
Display-illumination button
7
Audio signal button
8
Button for detecting “live” conductors/Operating mode
“Power cable”
9
Button for metal detection/Operating mode “Metal”
10
Button for detecting wood and metal beams/Operating
mode “Drywall”
11
Contact pads
12
Sensor area
13
Type plate
14
Battery lid
15
Latch of battery lid
16
Fixture for carrying strap
17
Protective pouch
18
Carrying strap
The
accessories
illustrated
or
described
are
not
included
as
stand-
ard
delivery.
To Next Page
Loading...
