English | 21
1 609 92A 3WU | (12.6.17)
Bosch Power Tools
Temperature Dependent Overload
Protection
When using as intended for, the power
tool cannot be subject to overload.
When the load is too high or the allow-
able battery temperature is exceeded,
the electronic control switches off the
power tool until the temperature is in
the optimum temperature range again.
Protection Against Deep Discharging
The lithium-ion battery is protected
against deep discharging by the “Elec-
tronic Cell Protection (ECP)”. When the
battery is empty, the machine is
switched off by means of a protective
circuit: The inserted tool no longer
rotates.
Maintenance and
Service
Maintenance and Cleaning
Before any work on the machine
(e. g., maintenance, tool change,
etc.) as well as during transport
and storage, set the rotational di-
rection switch to the centre posi-
tion. Unintentional actuation of the
On/Off switch can lead to injuries.
For safe and proper working, al-
ways keep the machine and venti-
lation slots clean.
When the battery is no longer opera-
tive, please refer to an authorised after-
sales service agent for Bosch power
tools.
OBJ_BUCH-3206-001.book Page 21 Monday, June 12, 201
To Next Page
Loading...
Need help?
General
