en Cleaning the appliance and parts
10
¡ Observe the maximum processing
quantity of 750 g. The markings on the
filling container are for guidance and re-
late to wheat.
¡ To prevent overloading the appliance,
grind max. 2 kg in one grinding process.
Afterwards, leave the appliance to cool
down for at least one hour.
→Fig. 10 - 11
After using the appliance
→Fig. 12 - 17
Cleaning the appliance and parts
Cleaning the appliance and
parts
Cleaning the appliance and parts
▶ Clean the individual parts as indicated in
the table.
→Fig. 18
Troubleshooting
Troubleshooting
Troubleshooting
The grain mill is not working.
The grain mill is not assembled correctly.
▶ Check whether the grain mill has been
assembled correctly.
An installed predetermined breaking point
protects the drive from damage. The
agitator paddle on the underside of the
housing will break at the predetermined
breaking point if there are foreign objects in
the grinder or if damp grain is ground.
▶ To replace the agitator paddle, re-order
from customer service quoting order
number 10018359.
The grinding result is not how you want.
The setting ring is not set to the grinding
level required.
▶ Set the grinding level required by turn-
ing the setting ring.
To Next Page
Loading...
