EasyManua.ls Logo

Bosch Grain Mill - Product Safety Information; General Safety Guidelines; Preventing Material Damage; Accessory Operation Guide

Bosch Grain Mill
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety en
9
Safety
¡ Read this instruction manual carefully.
¡ Observe the instructions for the main unit.
Only use the accessories:
¡ with a kitchen machine from the same series MUMS6, MUM9.
¡ with genuine parts and accessories.
¡ for grinding wheat, rye, buckwheat, husk-free barley, husk-free
oats, millet, spelt and rice.
Do not reach into the filling shaft.
Never assemble the accessories on the main unit.
Only attach and remove accessories once the drive has stopped
and the appliance has been unplugged.
The accessories should only be used in the intended operating
position.
Avoiding material damage
Avoiding material damage
Avoiding material damage
Set up the appliance at a sufficient dis-
tance from walls, easily damaged sur-
faces and other appliances.
Do not insert objects into the filling shaft
or housing, e.g. wooden spoons.
Never use the appliance to grind corn,
poppy seeds, soya beans or coffee
beans.
Never operate the appliance at no-load.
Overview
Overview
Overview
→Fig. 1
1
Grinding cone
2
Grinding ring
3
Filling container
4
Setting ring
5
Housing with setting ring
6
Discharge chute
Overview of main units
This accessory can be used with different
main units.
You can prepare your kitchen machine as
shown.
→Fig. 2
A
Kitchen machine from the MUMS6
series
B
Food processor from the MUM9
series
Using the accessories
Using the accessories
Using the accessories
Follow the illustrated instructions.
Assembling the accessory
Note:To insert the grinding ring properly,
make sure that the arrow marked on the
grinding ring points to the markings on the
setting ring and housing.
→Fig. 3 - 5
Attaching the accessory to the main
unit
→Fig. 6 - 9
Grinding grain
Notes
¡ You can set the grinding level by turning
the setting ring before or even during the
grinding process. For a coarser grinding
level, turn the setting ring anticlockwise.
For a finer grinding level, turn the setting
ring clockwise.
¡ Please note that the grain to be pro-
cessed must be dry and without stones.

Related product manuals