Bosch Greentherm T9900 SE/i 199 - Page 48

Operation instructions
Greentherm T9900 SE/i – 6 720 813 635 (2019/03)
48
Fig. 45 SA - Settings
This menu provide access to several parameters.
▶ Access to information / adjustments menu.
Display shows P4 Information.
▶ Touch the symbol until the display shows SA
Settings.
▶ Touch the symbol .
Display shows A0 Clock/Date.
▶ Use the symbols or to scroll through the
information/adjustments menus.
– A0 Clock/Date
– A1 Recirculation
– A2 Vacations
– A3 Language
– A6 Display Position
– A7 Wireless Connectivity
– A8 Startup Delay
– A9 Units Set
– AA Display Timeout
– AC Lock Display
▶ Touch the symbol to select the desired information.
A0 Clock/Date
Set the time:
▶ Touch the symbol .
Display shows Clock and Date menu.
▶ Touch the symbol to set the Clock.
▶ Use the symbols or to set the hours.
▶ Touch the symbol when hour is correct.
▶ Use the symbols or to set the minutes.
▶ Touch the symbol when minutes are correct.
▶ Use the symbols or to choose a.m. or p.m.
▶ Touch the symbol to exit the Clock menu.
Set the Date:
▶ Use the symbols or to choose the Date menu.
Display shows Date menu: MM / DD / YYYY.
▶ Touch the symbol .
▶ Use the symbols or to set the month.
▶ Touch the symbol when month is correct.
▶ Use the symbols or to set the day.
▶ Touch the symbol when the day is correct.
▶ Use the symbols or to set the year.
▶ Touch the symbol when the year is correct.
▶ Touch the symbol to exit the Date menu.
Clock and Date are defined.
▶ Touch the symbol , the Hours and Clock blink 3 times
and exit menu.
A1 Recirculation
Choosing a recirculation program:
▶ Use the symbols or to scroll through the options.
– HR House Recirculation
– TL Tank Loading
– OFF Off
HR House Recirculation
• AA Always Active
• SCH Schedule
AA Always Active
Set the Always Active:
▶ Touch the symbol , to select ON.
Recirculation will be always active.
SCH Schedule
Creating a Schedule:
▶ Touch the symbol , to select Schedule.
Display shows week days.
▶ Touch the symbols or to select the desired week
day.
▶Press ,
▶ Use the symbols or to choose option Add New.
▶ Touch the symbol , to enter the recirculation program.
▶ Use the symbols or to choose the beginning
hour.
▶ Touch the symbol , to set the beginning hour.
▶ Use the symbols to choose the end hour.
▶ Touch the symbol , to set the ending hour.
A recirculation period is defined.
The user can add additional recirculation periods on the
same day.
▶ Touch the symbol , to select Add New and repeat all
steps mentioned above.
Copy recirculation program,
The user can copy the recirculation period(s) to other week
days.