Bosch Greentherm T9900 SE/i 199 - Page 49

Operation instructions
49
Greentherm T9900 SE/i – 6 720 813 635 (2019/03)
▶ Use the symbols or to select the day of the week
to be copied.
▶ Use the symbols or to choose option Copy to.
▶ Touch the symbol .
Display shows week days.
▶ Touch the symbol to select the day of the week.
▶ Use the symbols or to choose another week day.
When week days are selected,
▶ Touch the symbol to validate operation.
▶ Touch the symbol to exit.
Deleting a recirculation program,
▶ Use the symbols or to select the day of the week
to be deleted.
▶ Touch the symbol .
▶ Use the symbols or to choose option Delete.
▶ Touch the symbol .
▶ Use the symbols or to choose a recirculation
period.
▶ Touch the symbol twice to delete recirculation period.
▶ Touch the symbol to exit.
TL Tank Loading
▶ Touch the symbol .
Display shows following menu.
– External NTC
– Internal NTC
– Aquastat
Select the menu according with the installation.
OFF
Set the OFF:
▶ Touch the symbol , to select OFF.
Recirculation will not be active.
A2 Vacations
Set Vacation time.
The burners will not activate while the appliance is in vacation
mode.
▶ Touch the symbol .
Display shows Vacation menu.
▶ Use the symbol to choose On.
On starts to blink.
▶ Touch the symbol to define first day of vacation:
MM/DD/YYYY.
▶ Use the symbols or to set the month.
▶ Touch the symbol when month is correct.
▶ Use the symbols or to set the day.
▶ Touch the symbol when day is correct.
▶ Use the symbols or to set the year.
▶ Touch the symbol when year is correct.
▶ Use the symbols or to define the total of days.
▶ Touch the symbol to finish programming.
▶ Touch the symbol to activate vacation program.
Deactivating the vacation program.
▶ Use the symbol or to select “Off”
Off starts to blink.
▶ Touch the symbol .
Off option is selected.
▶ Touch the symbol to deactivate vacation program.
A3 Language
How to set the language,
▶ Use the symbols or to choose the language.
▶ Touch the symbol .
The language is selected.
A6 Display Position
Set the position:
▶ Touch the symbol ,
Adjust “Burner status/Error symbol” (Fig. 39, [1])
display position;
• Vertical
• Horizontal
▶ Touch the symbol ,
Adjust “LCD display” position (Fig. 39, [7]);
• Vertical
• Horizontal
After the display's position has been adjusted:
▶ Touch the symbol to exit.
A7 Wireless Connectivity
For more information:
▶  section 6.9 "Wi-Fi connection".
A8 Startup Delay
This menu allows programing a burner start delay between 0
and 60 seconds, after detecting water flow.
▶ Access to information / adjustments menu.
Display shows SA Settings.