-21-
Read and observe all instructions.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
UÊ >ÛiÊÌiÊÀiÌiÊVÌÀÊÀi«>Ài`ÊÞÊÌÀÕ}Ê>ʵÕ>vi`ÊÀi«>ÀÊ«iÀÃÊ>`ÊÊ Ê
only using identical replacement parts. This will ensure that the functionality
of the remote control is maintained.
UÊ ÊÌÊ«iÀ>ÌiÊÌiÊÀiÌiÊVÌÀÊÊiÝ«ÃÛiÊ>ÌëiÀiÃ]ÊÃÕVÊ>ÃÊÊÌi
presence of flammable liquids, gases or dusts. Sparks can be created in the
remote control which may ignite the dust or fumes.
UÊ ,i>`Ê>`ÊÃÌÀVÌÞÊLÃiÀÛiÊÌiÊÃ>viÌÞÊÜ>À}ÃÊÊÌiÊ«iÀ>Ì}ÊÃÌÀÕVÌÃÊÊ Ê
of the rotational laser.
Inserting/Replacing the Battery
Using alkali-manganese batteries is recom-
mended for operation of the remote control.
To open the battery lid 8A, press the latch 9A in
the direction of the arrow and remove the battery
lid. Insert the battery provided.
When inserting, pay attention to the correct
polarity according to the representation on
the inside of the battery compartment.
UÊ ,iÛiÊÌiÊL>ÌÌiÀÞÊvÀÊÌiÊÀiÌiÊ
control when not using it for longer
periods. When storing for longer periods, the
battery can corrode and discharge itself.
RC1 General Safety Rules
The remote control is intended for controlling rotational laser levels
in indoor and outdoor use.
RC1 Intended Use
RC1 Preparation
RC1 Technical Data
Remote control RC1
Working range
1)
100 ft (30 m)
Operating temperature
–10 °C ~ +50 °C
Storage temperature
–20 °C ~ +70 °C
Battery
1 x 1.5 V LR06 (AA)
Weight according to
EPTA-Procedure 01/2003
2.4 oz. (69 g)
1) The working range can be decreased by unfavorable environmental conditions (e.g. direct sun
irradiation).
Please observe the article number on the type plate of your remote control.
The trade names of individual remote controls may vary.
For clear identification of your remote control, see the serial number
10A on the type plate.
w ww . . co m
information@itm.com1.800.561.8187