To Next PageTo Next Page
Need help?Do you have a question about the Bosch GRL 500 H and is the answer not in the manual?
General| Type | Rotary Laser Level |
|---|---|
| Working Range (with receiver) | 500 m |
| Self-Leveling | Yes |
| Self-Levelling Range | ± 5° |
| Laser Diode | 635 nm, < 1 mW |
| Rotation Speed | 600 RPM |
| Dust and Splash Protection | IP54 |
| Tripod Thread | 5/8" |
| Leveling Method | Self-leveling |
| Levelling Time | 15 seconds |
| Laser Class | 2 |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +70°C |
| Power Source | 4 AA Batteries |
Warnings regarding direct laser beam exposure and bystander safety.
Guidelines for proper tool use, accessories, and maintenance to prevent injury.
Recommendations for alertness, using safety equipment, and proper laser viewing glasses.
Information on obtaining qualified service and establishing a maintenance routine.
Detailed steps for turning the measuring tool and laser receiver on and off.
How to activate, deactivate, and understand the sleep mode function for energy saving.
Information on the RTC battery and the security features of the theft alarm system.
Step-by-step guide for checking and performing calibration after warnings.
How the tool automatically levels itself after switching on and during operation.
Instructions for setting a slope on the X-axis and its operational range.
How to activate and use the center line mode for alignment.
Procedure for verifying the tool's leveling accuracy in the horizontal position.
Procedure for verifying the tool's leveling accuracy in the vertical position (GRL 500 HV).
Step-by-step guide for calibrating the X-axis of the measuring tool.
Step-by-step guide for calibrating the Y-axis of the measuring tool.
Procedure for calibrating the Z-axis of the GRL 500 HV measuring tool.
Detailed solutions for specific error codes encountered during tool operation.
Addressing system errors and malfunctions without specific error codes.
