-15-
Rotational Laser Level GRL 500 H
The measuring tool is intended for
determining and checking precise horizontal
lines. The measuring tool is suitable for
indoor and outdoor use.
Rotational Laser Level GRL 500 HV
The measuring tool is intended for
determining and checking precise horizontal
and vertical lines. The measuring tool is
suitable for indoor and outdoor use.
Rotational Laser Level GRL 500 H GRL 500 HV
Working range (diameter)
– without laser receiver, approx.
– with laser receiver, approx.
1)
130 ft (40 m)
1,650 ft (500 m)
130 ft (40 m)
1,650 ft (500 m)
Leveling Accuracy
2) 3)
– Horizontal
– Vertical
± 1/16-in at 100 ft
(± 1.5 mm at 30 m)
-
± 1/16-in at 100 ft
(± 1.5 mm at 30 m)
± 1/8-in at 100 ft
(± 3 mm at 30 m)
Self-leveling range, typically ± 5° ± 5°
Leveling duration, typically 15 s 15 s
Rotational speed 600/min 600/min
Single-axis slope operation
(adjustable via keypad and display)
Accuracy
2)
±8.5 %
±0.1 %
±8.5 %
±0.1 %
Theft alarm system
Calibration interval indicator
Operating temperature 14 °F to 122 °F
(–10 °C to +50 °C)
14 °F to 122 °F
(– 10 °C to +50 °C)
Storage temperature -5 °F to 160 °F
(–20 °C to +70 °C)
-5 °F to 160 °F
(–20 °C to +70 °C)
Relative air humidity, max. 90% 90%
Max. altitude 6,500 ft (2000 m) 6,500 ft (2000 m)
Laser class 2 2
Laser type 635 nm, < 1 mW 635 nm, < 1 mW
Laser beam Ø at the exit opening, approx.
2)
3/16-in (5 mm) 3/16-in (5 mm)
Tripod mount
– Vertical
– Horizontal
5/8-11
-
5/8-11
5/8-11
Weight 5.1 lb (2.3 kg) 5.1 lb (2.3 kg)
Dimensions (length x width x height) 9.2 x 8.5 x 7.6-in
(234 x 217 x 194 mm)
9.2 x 8.5 x 7.6-in
(234 x 217 x 194 mm)
Degree of protection IP 56 (protected
against dust and
powerful water jets)
IP 56 (protected
against dust and
powerful water jets)
Intended Use
Technical Data
2610A16816.indd 15 12/8/15 2:53 PM
To Next Page
Loading...
