-14-
!
WARNING
When batteries are not in
tool or charger, keep
them away from metal objects. For
example, to protect terminals from shorting
DO NOT place batteries in a tool box or
pocket with nails, screws, keys, etc. Fire or
injury may result.
Do not put batteries into fire or expose to
high heat. They may explode.
!
WARNING
Do not attempt to
disassemble the battery
or remove any com ponent projecting
from the battery terminals. Fire or injury
may result. Prior to disposal, protect exposed
terminals with heavy insulating tape to
prevent shorting.
Lithium-ion Batteries
If equipped with a lithium-ion battery, the
battery must be collected, recycled or
disposed of in an environ mentally sound
manner.
“The EPA certified RBRC
Battery Recycling Seal on
the lithium-ion (Li-ion)
battery indicates Robert
Bosch Tool Corporation is
voluntarily participating in an
industry program to collect and recycle these
batteries at the end of their useful life, when
taken out of service in the United States or
Canada. The RBRC program provides a
convenient alterative to placing used Li-ion
batteries into the trash or the munici pal waste
stream, which may be illegal in your area.
Please call 1-800-8-BATTERY for information
on Li-ion battery recycling and disposal
bans/restrictions in your area, or return your
batteries to a Skil/Bosch/Dremel Service
Center for recycling. Robert Bosch Tool
Corporation’s involvement in this program
is part of our commitment to preserving our
environment and conserving our natural
resources.”
Battery Care
Battery Disposal
Symbols
Symbol Name Designation/Explanation
Class II
construction
Designates double
insulated construction
tools
Warning
symbol
Alerts user to warning
messages
Symbol Name Designation/Explanation
Li-ion RBRC
seal
Designates Li-ion
battery recycling
program
Read manual
symbol
Alerts user to read
manual
This symbol designates that this
tool is listed by Underwriters
Laboratories, to United States and
Canadian Standards.
This symbol designates that this
tool complies with CEC California
Energy Commission energy efficiency
requirements.
This symbol designates that this tool
complies with Part 15 of the FCC
Rules.
Important: Some of the following symbols may be used on your tool. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate the tool
better and safer.
2610A16816.indd 14 12/8/15 2:53 PM