Need help?Do you have a question about the Bosch Professional GRL 500 HV and is the answer not in the manual?
General safety instructions and warnings for using the measuring tool safely.
Precautions regarding laser beam exposure and eye safety.
Guidelines for safe handling, charging, and disposal of batteries.
Details the specific applications and purpose of the rotational laser level.
Safety guidelines for using the battery charger and handling potential risks.
Safety instructions for operating the laser receiver/remote control.
Lists and describes the key features of the rotational laser level and laser receiver.
Provides detailed specifications, ranges, accuracy, and dimensions of the laser level.
Instructions for charging the batteries of the measuring tool and laser receiver.
Explanation of the indicators showing battery charge status.
Details on how to charge the battery for the measuring tool and laser receiver.
Recommendations for best practices in handling and storing the battery.
Steps for the first-time setup and use of the measuring tool and laser receiver.
Guidance on positioning the measuring tool for horizontal and vertical operation.
Explanation of the different states the system can be in: Operating, Sleep, Switched Off.
Procedures for turning the measuring tool and laser receiver on and off.
Detailed steps on how to power on the measuring tool and laser receiver.
Instructions for turning off the measuring tool and laser receiver.
How to activate and deactivate the energy-saving sleep mode.
Conditions and procedures for the automatic power-off function.
Information on RTC battery and how to activate/use the theft alarm system.
Understanding and managing indicators for calibration status and warnings.
Explains operating modes, axis orientation, and rotational operation.
Details on how the tool automatically levels itself during operation.
Covers single-axis slope operation and centre line mode functionality.
Step-by-step guide for checking and performing calibration after warnings.
Tips and methods to quickly locate the centre line of the laser receiver.
Explanation of the anti-drift system and how to deactivate it.
Using line control in vertical mode and centre line mode for alignment.
Understanding the display showing distance between rotational plane and centre line.
How the measuring tool communicates wirelessly with the laser receiver.
Adjusting the audio signal for laser beam detection and volume levels.
Factors affecting the measuring tool's accuracy, such as temperature.
Instructions for attaching the laser receiver using the measuring rod clamp.
How to mark beam height and configure display settings.
Procedure to check levelling accuracy in the horizontal position.
Procedure to check levelling accuracy in the vertical position (GRL 500 HV).
General guidance and prerequisites for calibrating the measuring tool.
Step-by-step guide for calibrating the X-axis of the measuring tool.
Step-by-step guide for calibrating the Y-axis of the measuring tool.
Step-by-step guide for calibrating the Z-axis of the measuring tool.
General advice for use and how to set display units for measurements.
Information on the use and limitations of laser viewing glasses.
Guidance on using tripods, wall mounts, and measuring rods with the tool.
Practical examples of how to use the measuring tool for specific tasks.
Lists error codes, their problems, and corrective measures for the measuring tool.
Troubleshooting steps for issues that do not display an error code.
Instructions for keeping the measuring tool, charger, and receiver clean.
Information on contacting service for repairs, spare parts, and support.
General| Working Range (with receiver) | 500 m |
|---|---|
| Vertical and Horizontal Alignment | Yes |
| Self-Leveling Range | ± 5° |
| Laser Class | 2 |
| Laser Diode | 635 nm, < 1 mW |
| Laser Wavelength | 635 nm |
| Battery Type | Li-Ion |
| Dust and splash protection | IP 56 |
| Protection class | IP 56 |
| Tripod thread | 5/8" |
| Type | Rotating laser level |
| Rotation speed | 600 rpm |
| Operating temperature | -10°C to +50°C |
| Storage temperature | -20 – 70 °C |
To Next Page