To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSB 21-2 RCT and is the answer not in the manual?
General| Reverse | Yes |
|---|---|
| Chuck type | Keyless |
| Built-in light | - |
| Product design | Pistol grip drill |
| Torque (max) | 43 N⋅m |
| Spindle thread | 1/2\ |
| Number of gears | 2 |
| Idle speed (max) | 3000 RPM |
| Sound power level | 106 dB |
| Chuck capacity (max) | 13 mm |
| Chuck capacity (min) | 1.5 mm |
| Sound pressure level | 95 dB |
| Idle speed (1st gear) | 900 RPM |
| Sound level uncertainty | 5 dB |
| Impact rate (high speed) | 51000 bpm |
| Vibration level (screwdriving) | 2.5 m/s² |
| Drilling diameter in wood (max) | 40 mm |
| Drilling diameter in steel (max) | 16 mm |
| Vibration level (metal drilling) | 5.6 m/s² |
| Drilling diameter in concrete (max) | 22 mm |
| Vibration level (concrete drilling) | 14.6 m/s² |
| Vibration level uncertainty (metal drilling) | 1.5 m/s² |
| Vibration level uncertainty (concrete drilling) | 1.8 m/s² |
| Input power | 1300 W |
| Output power | 695 W |
| Power source | AC |
| AC input voltage | 230 V |
Weight and Dimensions| Depth | 220 mm |
|---|---|
| Width | 363 mm |
| Height | 81 mm |
| Weight | 2900 g |
| Package depth | 390 mm |
| Package width | 360 mm |
| Package height | 110 mm |
Essential safety precautions for all power tool operations, covering work area, electrical, and personal safety.
Guidelines for a safe workspace and electrical precautions to prevent shocks.
Advice on operator alertness, protective gear, and proper attire.
Instructions for correct tool operation and maintenance to ensure safety.
Safety advice pertinent to drill operations, including noise protection and auxiliary handle use.
Defines the specific applications for which the machine is designed.
Lists and identifies the key components and functions of the power tool.
Details measured noise and vibration levels according to EN 60745 standards.
Statement confirming the product's compliance with relevant European directives and standards.
Provides detailed specifications for different models of the tool.
Instructions for attaching the auxiliary handle and setting the depth stop for precise control.
Steps for inserting, removing, and securing various types of drill bits and accessories.
Detailed instructions for removing and installing the drill chuck unit.
How to start, stop, reverse direction, select gears, and set operating modes.
Guidance on adjusting speed, torque, and using electronic control features.
Explanation of the safety clutch and its role in preventing kickback.
Tips for efficient tool performance and safe working habits.
Procedures for regular cleaning and basic maintenance of the power tool.
Information on support resources and proper tool disposal.
