Need help?Do you have a question about the Bosch GSH 16-30 and is the answer not in the manual?
General| Input power | 1750 W |
|---|---|
| Power source | AC |
| Impact rate | 1300 bpm |
| Impact energy (max) | 41 J |
| Weight (including battery) | 16500 g |
Weight and Dimensions| Width | 255 mm |
|---|---|
| Height | 760 mm |
Ensure proper plugs, avoid earthed surfaces, and protect against wet conditions.
Stay alert, use PPE, prevent unintentional starting, and dress appropriately.
Use correct tool, do not force, maintain tool, keep cutting tools sharp, and use as intended.
Wear ear protection, use auxiliary handles, and hold by insulated surfaces.
Check for utilities, maintain balance, secure workpiece, and use detectors for hidden lines.
Machine is for heavy chiselling, demolition, driving, and compacting.
Lists and describes numbered parts of the machine shown in illustrations.
Provides technical specifications like article number, power, impact rate, and weight.
Details sound emission and vibration total values as per EN standards.
Instructions to adjust the carrying handle for optimal user comfort.
Step-by-step guide to changing tools for GSH 16-28 and GSH 16-30 models.
Warns about health risks from dust and recommends protective measures and ventilation.
Guidance on mains voltage and initial tool operation.
Instructions for operating the On/Off switch to start and stop the machine.
Advice on holding the tool with both hands and using moderate pressure for optimal impact damping.
Guidance on sharpening chisels using grinding wheels and heat treatment.
Instructions for keeping the machine clean and professional cord replacement.
Info on tool cutout due to worn carbon brushes and need for service.
Provides contact details for Bosch service centers in various countries.
To Next Page
