Bosch GSR12V-140FC User Manual

IMPORTANT: IMPORTANT : IMPORTANTE:
Read Before Using Lire avant usage Leer antes de usar
For English Version Version française Versión en español
See page 2 Voir page 15 Ver la página 29
Operating/Saf ety Instructions
Consignes de sécurité/d’utilisation
Instrucciones de funcionamiento y seguridad
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
Call Toll Free for
Consumer Information
and Service Locations
Pour obtenir des informa-
tions et les adresses de nos
centres de
service après-vente,
appelez ce numéro gratuit
Llame gratis para
obtener información
para el consumidor y
ubicaciones de servicio
GSR12V-140FC
2610045267 A5.indd 1 11/23/16 9:49 AM

Bosch GSR12V-140FC Specifications

General

Type	Cordless Drill/Driver
Voltage	12 V
Drilling Diameter in Steel, Max	10 mm
Screw Diameter, Max	8 mm
Battery Type	Li-ion
No-load Speed (1st Gear / 2nd Gear)	0-1300 RPM
Torque (Soft/Hard)	30 settings

Summary

Safety Symbols

General Power Tool Safety Warnings

Work area safety

Guidelines for maintaining a safe and clean work environment.

Electrical safety

Precautions to prevent electric shock during tool operation.

Personal safety

Measures to protect the operator from injury.

Power tool use and care

Battery tool use and care

Instructions for the proper use and maintenance of battery packs.

Safety Rules for Cordless Drill/Drivers

Additional Safety Warnings

Symbols

Functional Description

Specifications

Assembly

Inserting and releasing battery pack

Steps to install and remove the tool's battery pack.

Mounting and Removing Adapters

Using Right Angle Adapter

Using Offset Adapter

Inserting and Removing Bits (Main Hex Drive)

Inserting and Removing Bits (Hex Chuck)

Inserting and Removing Bits (Drill Chuck)

Operating Instructions

Protection Against Deep Discharging

How the tool protects the battery from deep discharge.

Variable Speed Controlled Trigger Switch

Explanation of the variable speed trigger for control.

Forward/Reversing Lever and Trigger Lock

How to use the forward/reversing lever and lock the trigger.

Gear Shifting

Instructions for changing between gear ranges for different tasks.

Adjustable Clutch

Explanation of the 21 clutch settings for torque control.

Autolock™

How the automatic locking system works for manual tightening.

Built-in Work Light

Information about the automatic work light feature.

Battery Charge Condition Indicator Lights

Operating Tips

Drilling

Techniques for effective drilling to prolong bit and tool life.

Fastening With Screws

Procedure for driving screws without material damage.

Drill Bits

Advice on inspecting and using drill bits.

Drilling Wood

Drilling Metal

Service

Maintenance

Motors

Recommendations for motor examination and service.

Cleaning

Safety precautions and methods for cleaning the tool.

Batteries

Information on battery pack replacement and care.