To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSR18V-190B22 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | GSR18V-190B22 |
| Category | Power Tool |
| Language | English |
Symbol for potential personal injury hazards. Obey safety messages.
Indicates a hazardous situation that will result in death or serious injury if not avoided.
Indicates a hazardous situation that could result in death or serious injury if not avoided.
Indicates a hazardous situation that will result in minor or moderate injury if not avoided.
Keep the work area clean, well lit, and free from explosive atmospheres.
Match plugs to outlets, avoid contact with grounded surfaces, keep cords dry.
Stay alert, use common sense, do not use while tired or under influence.
Use correct tool, maintain tools, keep cutting tools sharp, follow instructions.
Recharge with correct charger, use designated battery packs, avoid shorting terminals.
Have tool serviced by a qualified repair person using identical replacement parts.
Details model number, voltage, speeds, capacities, and battery information.
Instructions for opening and closing the chuck to insert drill bits securely.
Explains two gear ranges (low/high) for torque and speed adjustment.
Describes trigger operation for controlling speed from minimum to maximum RPM.
Details lever for changing rotation direction and locking the trigger.
Use variable speed cautiously for driving nuts/bolts, start slow and increase speed.
Put bit in contact before trigger, apply light pressure for cleaner holes and tool life.
Use slow start speed to prevent wandering, increase speed as bit bites.
Use as a screwdriver, drill pilot holes, start slow and increase speed for screws.
Procedure for drilling pilot holes and countersinking for proper screw fastening.
Recommends professional service by Bosch centers for safety and proper function.
Replace battery packs when performance decreases or running time shortens.
Tool is factory lubricated and ready for use.
Check brushes if tool runs sporadically; replace worn brushes in pairs.
Recommends motor examination every six months for peak efficiency.
Disconnect power before cleaning, use compressed air, keep openings clean.
